Pool surrounds · Morayfield QLD
Pool surround coatings in Morayfield & Moreton Bay
Iron Coat Epoxy coats concrete pool surrounds across Morayfield and Moreton Bay with an epoxy flake system, slip resistant options for wet feet and a UV stable topcoat for the sun.
- Australian-made products
- Slip resistant options
- Free quotes
At a glance
- Surface
- Concrete pool surrounds and paths
- Prep
- Diamond grinding and repairs
- Wet areas
- Slip resistant options
- Topcoat
- UV stable for Queensland sun
- Quotes
- Free. Photos are a good start
What’s involved
Made for wet feet
Wet, barefoot and in full sun. A pool surround has the hardest brief of any slab at home.
A pool surround is wet most of the time, walked on barefoot, splashed with pool water every day and baked by the afternoon sun. Grip matters more here than anywhere else around the house, and so does a finish that won’t break down outdoors.
Slip resistant options are available for wet areas like this. The system goes down over concrete that has been diamond ground and repaired, and external surfaces get a UV stable topcoat.
Colour and heat
Lighter flake blends generally stay cooler underfoot than dark ones in full sun, which is worth thinking about around a pool. Browse the Ultra Flake and Hyper Flake charts, or try colours on a photo of your pool area with the free colour visualiser.
Pool water and cleaning
Chemical and stain resistance is part of why epoxy suits a surface that gets splashed with pool water. A regular hose down keeps it looking its best.
Coping and edges
The coating goes on concrete. Tiles, pavers and stone coping are different materials, so if your pool edge is one of those, point it out when you send photos so the quote reflects what’s actually there.
The process
How a pool surround job runs
Quote
Send photos of the whole surround, including the coping and any steps.
Prep
The concrete is cleaned, diamond ground and repaired.
Flake system
The epoxy base goes down with flake broadcast in your chosen blend.
Grip & topcoat
A UV stable topcoat seals it, with the slip resistant option for wet feet.
Cure
Stay off the surround until the coating has fully cured.
Where we work
Pool surround coatings across Moreton Bay
Based in Morayfield, covering the Moreton Bay region.
- MorayfieldBase
- Caboolture
- Burpengary
- Narangba
- North Lakes
- Mango Hill
- Wamuran
- Woodford
- Dayboro
- Elimbah
- Beerwah
- Landsborough
- Glass House Mountains
- Not on the list? Give us a call — 0423 627 131
Is epoxy a good option for around a pool?
It can be, with the right options: a slip resistant finish for wet feet and a UV stable topcoat for the sun, laid over properly prepared concrete. It suits concrete surrounds; tiled or paved areas are a different job.
Will an epoxy pool surround be slippery?
Any smooth surface gets slippery when wet, so pool surrounds should use the slip resistant option, which adds grip to the finish.
Does an epoxy pool surround get hot?
Any surface in full sun warms up. Lighter flake blends generally stay cooler underfoot than dark ones, so colour choice is worth thinking about around a pool.
How much does it cost to coat a pool surround?
It depends on the area, how many edges and steps it has and the condition of the concrete, so every pool surround is quoted individually, and quotes are free. Send through a few photos and rough measurements and we can come back with a price.
Let’s coat the pool surround
Send through a few photos of the surround, or ring Nathan and talk it through.